Саноатда рақамли технологиялар 2-jild 4-1-son (2024) · 136-140-betlar
CALCULATION OF THE EFFICIENCY OF HEAT TRANSFER THROUGH THE RIBBED SURFACE OF THE PYROLYSIS REACTOR
Узаков, Гулом Норбоевич, Рустамов, Сухроб Шухратугли, Uzoqov, G‘ulom Norboyevich, Rustamov, Suhrob Shuhrato‘g‘li, Uzakov, Gulom Norboevich, Rustamov, Suhrob Shuhratogli
Annotatsiya
In this article, the thermal parameters of the biomass pyrolysis thermal processing device were calculated. Also, the flow of flue gas at a temperature of 500-600 ℃ during the pyrolysis process, its movement on the ribbed surfaces of the pyrolysis reactor, and its effect on the water boiler on the outer wall of the reactor were studied. The bioreactor is made of the "pipe in a pipe" type, pyrolysis of biomass takes place in its inner pipe, and water is heated in the outer pipe due to the heat lost to the environment. At the same time, the internal pipe of the reactor allows obtaining gaseous fuel by thermal processing of biomass, and the heat in the external pipe of the boiler solves the problem of providing consumers with hot water in the heating system. The proposed device thermally processes agricultural biomass waste and provides autonomous consumers with alternative fuels and thermal energy at the same time.
reactorbiomassribbed surfaceflue gaswaterheat transferflowреакторбиомассаребристая поверхность
Metadata manbasi: jurnal OAI-PMH arxivi · Sindex toʻliq matnni saqlamaydi, manbaga havola beradi.