Саноатда рақамли технологиялар Том 3 № 4 (2025) · с. 205-210
STUDY OF THE CHANGES IN RHEOLOGICAL AND ADHESIVE PROPERTIES THROUGH THE MODIFICATION OF LIQUID GLASS
Murodov, Doston, Niyozov, Alisher, Akhmedov, Vokhid, Beshimov, Islom, Муродов, Достон Мухсинугли, Ниёзов, Алишер Камилович, Ахмедов, Вохид Низомович, Бешимов, Ислом Акмалжонович, Murodov, Doston Muhsino‘g‘li, Niyozov, Alisher Kamilovich, Axmedov, Voxid Nizomovich, Beshimov, Islom Akmaljonovich
Аннотация
This paper discusses the development of a modified, environmentally safe adhesive based on liquid glass (sodium silicate Na₂O·nSiO₂) with enhanced adhesion efficiency to wood. The sodium silicate used fully complies with the requirements of GOST 13078–81 and TU 6-18-003-87, with a silicate modulus of 2.6–2.8 and a solid residue content of 31–33%. An oligomer based on thiourea and glycerol was used as a modifier. The experiments were carried out by mixing the modifier with liquid glass in various mass ratios (5%, 10%, 15%). The experimental results showed that the modification process significantly improved the rheological and mechanical properties of the adhesive. At the optimal 10% modifier content, the adhesion strength increased from 2.28 MPa to 3.15 MPa (an increase of 27.6%), while water resistance rose from 62% to 82%. The viscosity was approximately 230 mPa·s, which fully meets the industrial range specified in GOST 13078–81 (200–250 mPa·s). The resulting modified adhesive does not release formaldehyde, is non-toxic, and environmentally safe, providing high adhesion and water resistance for wood bonding. The obtained results form a scientific and practical basis for expanding the use of modified sodium silicate-based adhesives in woodworking, construction, and furniture industries.
wood adhesivesodium silicatebonding strengthcuring technologyadhesioneco-friendly gluemodifierwater resistanceдеревянный клейнатрий силикат
Источник метаданных: OAI-PMH архив журнала · Sindex не хранит полный текст, а даёт ссылку на источник.