Саноатда рақамли технологиялар Том 4 № 1 (2026) · с. 96-103
ANALYSIS OF TECHNOLOGICAL METHODS FOR IMPROVING THE COMPLETENESS OF BLASTHOLE UTILIZATION IN DRILLING AND BLASTING OPERATIONS IN UNDERGROUND MINE WORKINGS
Zairov, Sherzod Sharipovich, Nutfulloyev, Gafur Subxonovich, Gaibnazarov, Bakhrom Abdaalievich, Ismatillayev, Navrozbek Abdujabborovich, Заиров, Шерзод Шарипович, Нутфуллоев, Гафур Субхонович, Гаибназаров, Бахром Абдаaлиевич, Исматиллаев, Наврyзбек Абдужаббарович, Zairov, Sherzod Sharipovich, Nutfulloyev, G‘afur Subxonovich, G‘oyibnazarov, Bahrom Abdialiyevich, Ismatillayev, Navro‘zbek Abdujabborovich
Аннотация
The paper addresses modern technological approaches aimed at improving blasthole utilization and preventing the formation of unbroken bottom zones (“cups”) during drilling and blasting operations in underground mine workings. The physical mechanisms responsible for cup formation, including non-uniform explosive energy distribution, lack of free surfaces, and specific features of detonation wave interaction with the rock mass, are analyzed. Scientifically substantiated methods such as reverse initiation of blasthole charges, intentional overdrilling, application of air gaps, combined stemming, and preliminary physico-chemical weakening of the rock mass using surfactants are considered. It is shown that the integrated application of these methods makes it possible to increase the blasthole utilization coefficient to 0.90–0.95, reduce the specific explosive consumption, and improve face quality while simultaneously decreasing seismic and environmental impacts.
drilling and blasting operationsblasthole chargesblasthole utilization coefficientbootlegsreverse initiationair gapscombined stemmingunderground mine workingsбуровзрывные работышпуровые заряды
Источник метаданных: OAI-PMH архив журнала · Sindex не хранит полный текст, а даёт ссылку на источник.