Яшил иқтисодиёт ва тараққиёт 3-tom 11-san (2025) · 113-120-betler
PHYSICO-CHEMICAL, TEXTURAL AND OPERATIONAL PROPERTIES OF CATALYSTS OBTAINED FROM LOCAL MINERAL RAW MATERIALS AND INDUSTRIAL TECHNOGENIC WASTE
НОРАЛИЕВ, САРДОР, НОРМУРОДОВ, САДРИДДИН
Annotaciya
The physico-chemical, textural, mechanical and operational properties of catalysts prepared from local mineral raw materials Oltintog’ and Angren kaolins, various grades of Navbahor bentonite, and Karmana opaque zeolite-bearing rocks together with industrial technogenic waste (metal-oxide active components) were studied. The supports were modified thermally, by acid treatment and hydrothermally; CuO, Bi2O3, NiO, CoO, ZnO, Cr2O3 and CdO were used as active components. The samples were characterized by IR spectroscopy, X-ray phase analysis (Rietveld method), scanning electron microscopy (SEM-EDS), a Shimadzu AGS-X mechanical testing machine, and water- and benzene-vapour adsorption isotherms (BET) measured on a McBain–Bakr balance. The results showed that the catalysts possess both Brønsted and Lewis acid sites, exhibit type IV adsorption isotherms, and have specific surface areas of 180–198 m2/g and crushing strengths of 44–60 kg/cm2. Bentonite-supported catalysts were distinguished by relatively higher specific surface area, mechanical strength and resistance to poisoning. The study substantiates the feasibility of converting cheap local raw materials and technogenic waste into value-added catalysts (a resource-efficient, circular approach).
AluminosilicateKaolinBentoniteZeoliteCatalystLocal Raw MaterialTechnogenic WasteBrønsted and Lewis Acid SitesAdsorption IsothermSpecific Surface Area
Metadata derekkózi: jurnal OAI-PMH arxivi · Sindex tolıq mátindi saqlamaydı, derekkózge silteme beredi.